Materials, tweezers, glue, magnification
Release the individual parts from the backing material and sort on your workbench. Always use
tweezers. Glue the 3 wires into the holes within the door.
Glue the bottom part (middle hole to the left) and the right wall (with 3 slots) to the back wall. Attach
the partition wall and the shelf.
Attach the left wall and the counter top (middle hole to the left). To attach the doors, slightly lift the
Couch (3 pieces)
Bend the seats with the tweezers and glue them to the back part. Wait until the glue has dried, then
attach the front part. Add fabric to your liking.
Glue the lower plate between the side parts. Wait until the
glue has dried, then attach the table tabletop.
Pile the wooden logs in the middle of the bottom part.
Secure with glue. Using tweezers, bend the sides of the
fireplace and glue it onto the back wall. Once it’s dry, attach
the counter top.
Bend the sides of the hood and glue it to the back. Allow to
dry and attach the system to the bottom plate
Attach small pictures, such as portraits or photographs, to
the frames from behind and put them on the walls.