|
|
 |
Class By Alex ZOHAR
LIGHT A FRONT OPEN TYPE DOLLHOUSE
Step 1 |
|
|
This is a recommendation for a front opening house, as the wires will show in the back.
The plans are for lighting to be in each room.
Make a small hole in the back. Pass the wire from the lamp through to the back of the house.
|
|
|
|
Using pliers, remove the two prongs from the plug.
|
|
|
|
remove the wire from the plug
|
|
|
|
Cut the wire to the length you wish to use.
|
|
|
|
Pass the wire through the hole from inside the house to the back of the house.
|
|
|
|
Thread the wires back through the plug
|
|
|
|
remove the plastic cover from the wire using your nails.
With your fingers, give each wire a twist to hold the strands together
|
|
|
|
Poke each wire into separate holes.
|
|
|
|
Using pliers, push the pins back into the holes
|
|
|
|
Plug your light directly into the socket strip. Connect the socket strip to the transformer and BINGO!
You can do this with each lamp in each room.
|
|
|
|
View Basket | 
Sign In | Currency
